HOW TO USE PEN DRIVE AS RAM IN XP WITHOUT ANY SOFTWARE.

First insert your pendrive,right click on MY COMPUTER, select PROPERTIES, select ADVANCED,select SETTING, SELECT ADVANCED, NOW select "CHANGE" and now u select the drive letter of ur pendrive above, then select the CUSTOMIZE SIZE tab here u give the amount regarding ur pendrive size in MB, AFTER GIVING THIS.....
COMPUTER NEEDS TO RESTART TO TAKE EFFECT.....THATS ALL

HOW TO CHECK WINDOWS ACTIVATION

YOU CAN CHECK WETHER YOU ARE USING AN ACTIVATED WINDOWS OR NOT.
 
START – RUN
TYPE     oobe/msoobe  /a
If your windows is not activated the activation window appears and seeks activation.
 
If it is activated a “WINDOWS IS ALREADY ACTIVATED” window appears

HOW TO CREATE A MESSAGE SCREEN IN WINDOWS THAT APPEAR BEFORE YOU LOGON

NOTE: Before doing this you have to make a backup of your Registry.

 
Making a backup of Registry
START – RUN
Type - regedit click OK
File   Export
Change the export range to ALL
Give a File Name and Save.
Double click on the saved file to Restore Registry.
STEPS
START – RUN
Type - regedit click OK
Expand HKEY_LOCAL_MACHINES
Expand SOFTWARE
Expand Microsoft
Expand Windows NT
Expand current version
Click Winlogon
Double click Legal Notice Caption
Give the Caption
Double click Legal Notice Text
Give the Text that you want to display
Restart your machine.

HOW TO MAKE A LAN CONNECTION BETWEEN TWO COMPUTERS

Here describes to make a Peer to Peer connection between two computers

 

COMPONENTS REQUIRED

 

LAN CARD OR BUILT IN LAN IN TWO SYSTEMS

CROSS CRIMPED CABLE (EASILY AVAILABLE IN COMPUTER HARDWARE SHOP)

 

IN TWO SYSTEMS

 

Make sure your LAN card or built in LAN is properly installed and working.

Plug the two ends in the LAN port of the two systems.

 

 

IN FIRST SYSTEM

 

Start-control panel-Network connections

Right click Local area connection and select properties.

NOTE: Local area connection icon appears only if your LAN card driver is installed

In General tab select Internet Protocol (TCP/IP) and click Properties

Select Use the following IP address

 

TO KNOW ABOUT IP ADDRESS CLICK HERE

 

Give the IP address and Subnet mask.

(Eg: 192.168.10.11  subnet is 255.255.255.0)

Click ok

In the local area connection properties Tick the “show icon in notification area when connected”

Click Close

Start – control panel- system

Select computer name tab click Change button

Give a suitable name in Computer name box

(Eg: sys 1)

Change the Workgroup to a desired name

(Eg: home)

Click OK then Apply- OK

Welcome message appear System seeks restart

Restart the system.

 

IN SECOND SYSTEM

 

Start-control panel-Network connections

Right click Local area connection and select properties.

NOTE: Local area connection icon appears only if your LAN card driver is installed

In General tab select Internet Protocol (TCP/IP) and click Properties

Select Use the following IP address

Give IP address with same Network ID with Different Host ID

(Eg: 192.168.10.12 subnet is 255.255.255.0)

Click OK

In the local area connection properties Tick the “show icon in notification area when connected”

Click Close

Start – control panel- system

Select computer name tab click Change button

Give a suitable name in Computer name box that not same as in First System

(Eg: sys 2)

Change the Workgroup to a desired name that same as in the First System

(Eg: home)

Click OK then Apply- OK

Welcome message appear System seeks restart

Restart the system

 

YOUR SHARED FOLDER IS NOW AVAILABLE BETWEEN TWO SYSTEMS

 

If no connection is between two computers disable Firewall.

HOW TO CHECK WETHER SMPS IS WORKING OR NOT.

Take a small piece of wire and connect one end in GREEN wire port and other in the BLACK. Switch ON the supply if the fan in the smps is working the smps is good. If not open the cover and check whether the Capacitors inside the Smps is bulged on the top. If bulged replace the capacitor with the same value of the earlier.Check the voltages with a multimeter.

SMPS CONNECTORS
 
Amphenol connector gives power supply to Mother Board
Mole x gives power supply to IDE drives
Mini Molex gives power supply to floppy drive.

 

SMPS WIRES IN ATX
 
WIRE                                      VOLTAGE                              FUNCTION
 
Black                                                   0                                 Ground
Blue                                                   -12                               Serial Data
Brown/Violet                                    +3.3                               Sensor
Gray                                                   +5                                Power good supply
Green                                                +5                                 Power supply on/off
Orange                                              +3.3                              D Ram Refreshing
Purple                                                +5                                Stored by voltage
White                                                  -5                                Refreshing Ram
Yellow                                                +12                              Motor Rotation
Red                                                     +5                               Logic circuit

Computer Support Long Beep Sound No Display on Compter monitor

Sometimes a Computer gives a Long Beep sound continuously and no display will be available one the Computer Monitor screen with blank.

Solution : 1. Make sure that the Ram on the Mother board is properly seated.

             2. If the above does not work Replace another Ram of the Same speed will work

How to Delete Startup Items in xp

To delete starup items Just follow this steps :

Click "Start Menu" - Go to "Run" - Type "msconfig"

goto "startup tab" uncheck the unwanted software applications there. so when the system boots up no unwanted applications will load when desktop appears.

Caution : Donot Uncheck all items, otherwise your system may wont bootup , uncheck only unwanted software applications.